Fireplace Installation and Repairs Craighall| Expert Service

Common Fireplace Issues We Repair in Craighall

Here are common fireplace issues that Major Appliances Repair frequently diagnose and repair, covering wood-burning, gas, and electric units:

Smoke Coming Back into the Room (Wood-Burning):
- Cause: Improper flue size, creosote buildup blocking the chimney, blocked or closed damper, negative house pressure, or cold flue.
- Solution: Professional chimney cleaning, damper inspection, or flue modification.
Pilot Light Won’t Stay Lit (Gas Fireplace):
- Cause: Dirty or faulty thermocouple (gas sensor), a weak thermopile, a loose connection, or low gas pressure.
- Solution: Clean/replace thermocouple or thermopile. Check gas pressure.
Gas Fireplace Won’t Ignite (No Spark or Flame):
- Cause: Faulty igniter, worn spark electrode, dirty burner ports, faulty gas valve, or a problem with the control module.
- Solution: Clean burner ports. Replace igniter or spark electrode. Diagnose gas valve/control module.
Gas Smell from Fireplace (When Not in Use):
- Cause: Gas leak from connections, faulty gas valve, or cracked gas line.
- Solution: Immediate action required: Turn off gas supply, ventilate, and call a professional gas technician.
Electric Fireplace Not Heating:
- Cause: Faulty heating element, tripped thermal cut-off switch, or a problem with the control board.
- Solution: Test/replace heating element or thermal switch. Diagnose control board.
Electric Fireplace Flame Effect Not Working:
- Cause: Burnt-out light bulb (for older models), faulty motor controlling the flame effect, or a problem with the flame module.
- Solution: Replace bulb or motor. Diagnose flame module.
Wood-Burning Fireplace Damper Stuck Open or Closed:
- Cause: Rust, creosote buildup, broken linkage, or bent metal.
- Solution: Clean damper area. Repair or replace damper mechanism.
Excessive Creosote Buildup (Wood-Burning):
- Cause: Incomplete combustion, burning unseasoned wood, insufficient draft, or restricted chimney.
- Solution: Professional chimney sweeping, adjust burning practices, or address draft issues.
Cracked Firebox or Refractory Panels (Wood-Burning):
- Cause: Extreme heat cycles, general wear and tear, or impact.
- Solution: Replace refractory panels or professional repair of the firebox liner.
Loose or Missing Mortar in Chimney/Fireplace:
- Cause: Age, weather exposure, or chimney movement.
- Solution: Tuckpointing (re-mortaring) or rebuilding affected areas.
Water Leaking into Fireplace:
- Cause: Cracked chimney crown, damaged flashing, missing/damaged chimney cap, or cracks in the chimney masonry.
- Solution: Repair/replace chimney crown, flashing, cap. Seal masonry cracks.
Noisy Fireplace Fan/Blower (Electric or Gas):
- Cause: Worn bearings, debris in the fan blades, or a loose motor.
- Solution: Clean fan/blower. Lubricate or replace motor.
Gas Fireplace Remote Control Not Working:
- Cause: Dead batteries, remote out of range, signal interference, or a faulty receiver in the fireplace.
- Solution: Replace batteries. Check range. Diagnose/replace receiver.
Pilot Light Goes Out Frequently (Gas Fireplace):
- Cause: Weak thermocouple/thermopile, drafts, or low gas pressure.
- Solution: Clean/replace thermocouple/thermopile. Check for drafts.
Gas Logs Don’t Look Realistic/Flame is Poor:
- Cause: Dirty burner ports, incorrect log placement, or low gas pressure.
- Solution: Clean burner ports. Adjust log placement. Check gas pressure.
Electric Fireplace Making Clicking Noise:
- Cause: Fan hitting something, relay in the control board, or flame motor issue.
- Solution: Inspect fan. Diagnose control board or flame motor.
Soot Stains Around Fireplace Opening:
- Cause: Insufficient draft, improper burning techniques, or a clogged chimney/flue.
- Solution: Improve draft, adjust burning habits, or professional chimney cleaning.
Sparks or Embers Escaping Chimney (Wood-Burning):
- Cause: Missing or damaged chimney cap/spark arrestor.
- Solution: Install or replace a proper chimney cap with spark arrestor.
Fireplace Draft Issues (Too Much or Too Little):
- Cause: Improper flue size, chimney height, obstructions, or house pressure imbalances.
- Solution: Professional assessment of chimney system and house ventilation.
Cracked Chimney Crown:
- Cause: Weather exposure, freeze-thaw cycles.
- Solution: Repair with crown sealant or replace the chimney crown.
Gas Fireplace Produces Yellow/Orange Flame (Should Be Blue):
- Cause: Incomplete combustion due to dirty burner ports or incorrect air-to-gas mixture. Can produce carbon monoxide.
- Solution: Clean burner ports. Professional adjustment of air mixture.
Odor from Fireplace (Musty/Smoky):
- Cause: Creosote buildup, dampness, animal nesting, or incomplete combustion odors.
- Solution: Chimney cleaning, investigate and seal leaks, remove nests.
Broken Glass Doors (Wood-Burning):
- Cause: Impact, thermal shock, or improper installation.
- Solution: Replacement of the glass panel.
Fireplace Control Panel Not Working (Electric/Gas):
- Cause: Power interruption, loose wiring, or a faulty control board.
- Solution: Check power. Professional diagnosis and replacement of control board.
Pellet Stove Not Feeding Pellets:
- Cause: Clogged hopper, jammed auger motor, or a faulty auger motor.
- Solution: Clear hopper. Clear/replace auger motor.
Pellet Stove Not Igniting:
- Cause: Faulty igniter (hot rod), insufficient air flow, or poor quality pellets.
- Solution: Replace igniter. Clean air passages. Use good quality pellets.
Wood-Burning Stove Door Not Sealing:
- Cause: Worn or damaged door gasket, or misaligned hinges/latch.
- Solution: Replace door gasket. Adjust hinges/latch.
Fireplace Has Animal or Bird Nesting:
- Cause: Unprotected chimney flue.
- Solution: Professional removal of nests. Install a chimney cap.
Discoloured Fireplace Mantle or Wall:
- Cause: Heat damage from insufficient clearance, smoke/soot leakage, or poor ventilation.
- Solution: Investigate cause of heat/smoke leakage. May require professional chimney/flue repair or improved insulation/clearance.
Carbon Monoxide Detector Alarms (Gas Fireplace):
- Cause: Incomplete combustion from the gas fireplace releasing CO.
- Solution: IMMEDIATE ACTION REQUIRED: Turn off fireplace and gas supply, ventilate, evacuate, and call emergency services/professional gas technician from a safe distance. This is a critical safety issue.

For any fireplace issue, especially those involving gas or chimney structure, it is highly recommended to contact a qualified professional technician to ensure safety and proper repair.

Best Fireplace Tips for Safety, Maintenance, and Operation

I. Fireplace Safety Tips (Crucial for All Types, Especially Wood & Gas):

Professional Inspections & Sweeping (Wood-Burning):
- Tip: Have your chimney and fireplace professionally inspected and cleaned at least once a year, especially if you use it regularly. Creosote buildup (a highly flammable residue) is a major fire hazard.
- Why: Prevents chimney fires, ensures proper drafting, and identifies structural issues.
Install & Test Detectors:
- Tip: Ensure you have working smoke detectors on every level of your home, and crucially, a carbon monoxide (CO) detector near your fireplace, especially if it’s gas-burning. Test them monthly.
- Why: CO is an invisible, odorless, deadly gas. Smoke detectors provide early warning of fires.
Use a Fire Screen or Glass Doors (Wood-Burning):
- Tip: Always use a sturdy fire screen or keep glass doors closed when the fireplace is in use (except when starting a fire or adding wood).
- Why: Prevents sparks, embers, and rolling logs from escaping the firebox and igniting nearby combustibles.
Clear Combustibles:
- Tip: Keep all flammable materials – rugs, curtains, furniture, paper, kindling, decorations – at least 3 feet (1 meter) away from the fireplace opening.
- Why: Reduces the risk of accidental ignition from stray sparks or radiant heat.
Proper Fuel Only (Wood-Burning):
- Tip: Only burn dry, seasoned hardwood (like oak, maple, ash). Never burn garbage, cardboard, plastics, treated wood, painted wood, or accelerants.
- Why: Wet or unseasoned wood creates more creosote and smoke. Other materials can release toxic fumes, cause excessive creosote, or even explode.
Extinguish Fires Completely:
- Tip: Allow a wood fire to burn down to embers before leaving the house or going to bed. Use a poker to separate logs to help them die down.
- Why: Ensures no lingering embers can reignite or cause issues when unattended.
Safe Ash Disposal (Wood-Burning):
- Tip: Place ashes in a metal container with a tight-fitting lid, away from any combustible materials, on a non-combustible surface (like concrete or dirt). Ashes can hold heat for days.
- Why: Prevents accidental fires from hot ashes.
Know Your Gas Shut-Off:
- Tip: Familiarize yourself with how to turn off the gas supply to your gas fireplace in an emergency.
- Why: Critical for safety if you smell gas or suspect a leak.
Never Use Accelerants:
- Tip: Do not use gasoline, lighter fluid, or other flammable liquids to start or rekindle any type of fire.
- Why: Highly dangerous and can cause explosions or flash fires.
Child & Pet Safety:
- Tip: Supervise children and pets closely around fireplaces. Consider fireplace gates or barriers.
- Why: Prevents burns from hot surfaces and accidental contact with flames or embers.

II. Fireplace Maintenance Tips (Regular Care for Longevity):

Clean the Firebox/Ash Pan (Wood-Burning):
- Tip: Remove ash regularly, leaving about an inch on the bottom to help with insulation for the next fire.
- Why: Prevents excessive ash buildup that can restrict airflow and affect performance.
Inspect & Clean Gas Logs:
- Tip: Annually clean gas logs and the burner area according to manufacturer instructions. Check for any blockages in burner ports.
- Why: Ensures clean burning, efficient operation, and prevents soot buildup.
Check Damper & Flue (Wood-Burning):
- Tip: Before each use, ensure the damper opens and closes smoothly and fully. Check for any obstructions.
- Why: Proper damper function is vital for smoke control and preventing cold drafts.
Inspect Gaskets & Seals (Wood Stoves/Inserts):
- Tip: Annually check the rope gaskets around the door and glass. Replace if cracked or worn to maintain an airtight seal.
- Why: A good seal improves efficiency and prevents smoke leaks.
Clean Electric Fireplace Vents:
- Tip: Periodically vacuum or wipe the air intake and output vents on electric fireplaces to prevent dust buildup.
- Why: Ensures proper airflow for the heater and prevents overheating.
Check for Masonry & Mortar Damage:
- Tip: Visually inspect the fireplace and chimney for cracks, deteriorating mortar, or crumbling bricks.
- Why: Structural integrity is crucial for safety and efficiency. Address issues promptly.
Examine Chimney Cap/Spark Arrestor:
- Tip: Check for damage, clogs from nests, or excessive creosote buildup.
- Why: Prevents rain, animals, and large embers from entering or exiting the chimney.
Clean Glass Doors (Wood-Burning & Gas):
- Tip: Use specialized fireplace glass cleaner when the glass is cool.
- Why: Maintains visibility and prevents permanent staining.
Test Remote Controls (Gas/Electric):
- Tip: Check batteries and ensure the remote and receiver are working properly.
- Why: Ensures reliable operation.
Address Water Leaks Immediately:
- Tip: If you notice water coming into the fireplace, identify and fix the source (e.g., chimney crown, flashing, masonry cracks).
- Why: Water damage can lead to structural problems, mould, and deterioration.

III. Fireplace Operation Tips (For Optimal Performance & Enjoyment):

Pre-heat the Flue (Wood-Burning):
- Tip: Before lighting a fire, hold a lit rolled newspaper up into the damper opening for 30-60 seconds.
- Why: Heats the air in the flue, creating an updraft and preventing smoke from entering the room.
Open Damper Fully:
- Tip: Always ensure the damper is fully open before lighting a fire and remains open until the fire is completely out and ashes are cool.
- Why: Crucial for drawing smoke up the chimney and preventing CO buildup.
Build a Proper Fire (Wood-Burning):
- Tip: Use the “top-down” method or a proper log cabin stack: kindling at the bottom, then progressively larger pieces of wood. Ensure good airflow.
- Why: Creates a quick, clean, and efficient burn with less smoke.
Monitor Flame Colour (Gas Fireplace):
- Tip: Gas flames should primarily be blue. If they are mostly yellow or orange, it indicates incomplete combustion.
- Why: Yellow/orange flames can produce carbon monoxide. Call a professional for adjustment.
Don’t Over-Fire (Wood-Burning):
- Tip: Avoid building excessively large or hot fires that can overheat the stove or chimney.
- Why: Can damage the fireplace, flue, and increase the risk of chimney fires.
Control Airflow (Wood Stoves/Inserts):
- Tip: Use the primary and secondary air controls to regulate the burn rate once the fire is established. Too much air causes rapid burning; too little causes smoke and creosote.
- Why: Optimizes efficiency and reduces emissions.
Mind the Heat (Electric Fireplace):
- Tip: Understand the heat settings and fan controls. Don’t block the heat outlet vents.
- Why: Ensures efficient heating and prevents damage from blocked airflow.
Allow for Adequate Venting (Gas Fireplaces):
- Tip: Follow manufacturer guidelines for venting requirements, especially for vent-free units where occasional window opening may be recommended.
- Why: Ensures proper exhaust of combustion byproducts.
Store Wood Properly (Wood-Burning):
- Tip: Store firewood at least 20 feet from your home, elevated off the ground, and covered from rain/snow but open to air circulation.
- Why: Ensures wood dries properly (seasons), burns cleaner, and prevents pest infestation near the house.
Trust Your Instincts:
- Tip: If anything seems off (strange smells, unusual noises, excessive smoke, difficulty operating), stop using the fireplace and call a qualified professional.
- Why: Better safe than sorry when it comes to fire and gas safety.

Fireplace Imstallation and Repair Questions & Answers

A fireplace is a significant investment in comfort and ambiance. Whether you’re considering a new installation or need to fix an existing unit, understanding the process and common issues is key. At Major Appliances Repair, we provide expert fireplace services, ensuring safety, efficiency, and lasting warmth.

I. General Fireplace Installation & Planning

Q: What types of fireplaces can I have installed?
- A: You can choose from wood-burning (traditional masonry or modern inserts/stoves), gas (vented, vent-free, direct-vent), or electric fireplaces (inserts, built-in, freestanding).
Q: What are the main considerations before installing a new fireplace?
- A: Consider fuel type (wood, gas, electric), venting requirements (chimney, direct vent, vent-free), heat output needs, budget, aesthetic preferences, and local building codes/regulations.
Q: Do I need a chimney for all types of fireplaces?
- A: No. Wood-burning fireplaces and most vented gas logs require a chimney. Direct-vent gas fireplaces use a dual-pipe vent system that can go through a wall or roof. Vent-free gas and electric fireplaces do not require a chimney or vent.
Q: What are the benefits of a gas fireplace over wood-burning?
- A: Gas fireplaces offer convenience (instant on/off), cleaner burning (less soot/ash), no need for firewood storage, and typically lower maintenance.
Q: Are electric fireplaces efficient for heating?
- A: Electric fireplaces are 100% efficient at converting electricity to heat, but electricity is often more expensive than gas or wood. They are best for zone heating or ambiance rather than primary heat for large spaces.
Q: What building codes apply to fireplace installation?
- A: Local building codes and national fire safety regulations dictate clearances to combustibles, venting requirements, chimney construction, and gas line installation. Always use a qualified professional.
Q: Can I convert my wood-burning fireplace to gas?
- A: Yes, in most cases, a gas log insert or gas fireplace insert can be installed into an existing wood-burning fireplace, provided the chimney is safe and up to code.

II. Wood-Burning Fireplace Installation & Repair

Q: Why is smoke coming back into my room from my wood fireplace?
- A: Common causes include a closed or stuck damper, a cold chimney (no proper draft), excessive creosote buildup, a chimney obstruction (nest), or negative house pressure.
Q: How often should a wood fireplace chimney be cleaned?
- A: At least once a year, or more frequently (e.g., every 50-70 fires) depending on usage and wood type, to prevent creosote buildup and chimney fires.
Q: What is creosote, and why is it dangerous?
- A: Creosote is a highly flammable tar-like substance that builds up inside chimneys from burning wood. It’s dangerous because it can ignite, causing a chimney fire.
Q: My fireplace damper is stuck. How can it be fixed?
- A: It could be rust, creosote buildup, or a broken linkage. A professional can clean, lubricate, or replace the damper mechanism.
Q: My fireplace has cracked refractory panels. Do they need replacing?
- A: Minor hairline cracks are often acceptable, but deep cracks or crumbling panels reduce efficiency and expose the masonry to direct heat, so replacement is recommended for safety and performance.
Q: Why are there soot stains around my fireplace opening?
- A: This indicates smoke spillage, likely due to a poor draft, a clogged chimney, or improper fire-building techniques.
Q: Water is leaking into my wood fireplace. What’s the cause?
- A: Common causes are a cracked chimney crown, damaged flashing where the chimney meets the roof, a missing or faulty chimney cap, or cracks in the chimney masonry.
Q: What type of wood should I burn in my fireplace?
- A: Always burn dry, seasoned hardwood (e.g., oak, maple, ash). Seasoned wood has been dried for at least 6-12 months.
Q: Can I install a wood stove or insert into an existing fireplace?
- A: Yes, but it must be properly sized and connected to a correctly lined and functional chimney. Professional installation is crucial for safety and efficiency.
Q: My wood stove door gasket is worn. Can I replace it?
- A: Yes, door gaskets are user-replaceable. Ensure you use the correct size and type of gasket for your stove model.
Q: What is a chimney liner, and why is it important?
- A: A chimney liner is a protective barrier inside the chimney flue (clay, metal, or ceramic). It contains combustion products, protects masonry from corrosion, and ensures proper draft. Crucial for safety.

III. Gas Fireplace Installation & Repair

Q: My gas fireplace won’t turn on (no flame). What’s the common problem?
- A: This could be a faulty igniter, a thermocouple or thermopile issue (not sensing heat), a dirty pilot assembly, low gas pressure, or a problem with the wall switch or remote receiver.
Q: Why won’t my pilot light stay lit on my gas fireplace?
- A: Most often, it’s a dirty or faulty thermocouple (or thermopile) that isn’t generating enough voltage to keep the gas valve open. It could also be a draft or low gas pressure.
Q: I smell gas near my fireplace, but it’s off. What should I do?
- A: This is an emergency. Immediately turn off the gas supply to the fireplace (and ideally, the main gas supply to the house), open windows and doors, evacuate everyone, and call your gas provider or emergency services from a safe distance. Do NOT use any electrical devices.
Q: Why are my gas fireplace flames yellow or orange instead of blue?
- A: Yellow/orange flames indicate incomplete combustion and can produce carbon monoxide. This is usually due to dirty burner ports or an improper air-to-gas mixture. Professional adjustment is required.
Q: My gas fireplace makes a popping or banging noise when operating.
- A: This can be caused by gas buildup before ignition, dirty burner ports, or improper gas pressure.
Q: Can I install a gas fireplace without an existing chimney?
- A: Yes, using a direct-vent or vent-free gas fireplace. Direct-vent units vent through a dedicated pipe system to the outside. Vent-free units don’t require external venting but have stricter safety guidelines.
Q: What is a direct-vent gas fireplace?
- A: A sealed combustion system where air for combustion is drawn from outside, and exhaust gases are expelled directly outside through a concentric venting system, typically through a wall or roof.
Q: What is a vent-free gas fireplace, and are they safe?
- A: Vent-free fireplaces burn gas very efficiently and release combustion byproducts directly into the room. They are designed to operate safely with oxygen depletion sensors (ODS) but have limitations and specific clearance requirements. Ventilation is still recommended.
Q: My gas fireplace remote control isn’t working.
- A: Check the batteries in the remote. If they’re fine, the issue could be a faulty receiver in the fireplace, interference, or the remote itself.
Q: Why does my gas fireplace produce soot?
- A: Soot indicates incomplete combustion. Causes include dirty burner ports, incorrect air-to-gas mixture, or incorrect log placement.
Q: Can I install a gas log set into any wood-burning fireplace?
- A: No. The fireplace and chimney must be in good working condition, and the damper must be locked in the open position to vent combustion byproducts.
Q: What’s the difference between a thermocouple and a thermopile?
- A: Both are safety devices that generate a small electrical current when heated by the pilot flame. A thermocouple has two dissimilar metals; a thermopile uses multiple thermocouples in series to produce more voltage, often used for millivolt systems that can power a gas valve directly.
Q: How do I clean gas logs?
- A: Allow logs to cool completely. Gently brush off dust or soot with a soft brush. Do not use water or chemical cleaners unless specified by the manufacturer. Avoid rearranging logs from their original pattern.
Q: My gas fireplace makes a clicking sound but doesn’t light.
- A: This usually means the igniter is trying to spark, but there’s no gas, or the gas isn’t reaching the igniter. Check gas supply, or it could be a faulty igniter or gas valve.
Q: What’s an ODS (Oxygen Depletion Sensor) on a gas fireplace?
- A: An ODS is a safety device found on vent-free gas fireplaces. It monitors oxygen levels in the room and automatically shuts off the gas supply if oxygen levels drop to unsafe levels.
Q: How often should I service my gas fireplace?
- A: Annually, a qualified technician should inspect and clean your gas fireplace to ensure safe and efficient operation, checking gas connections, ignition systems, and burner integrity.

IV. Electric Fireplace Installation & Repair

Q: My electric fireplace isn’t turning on. What should I check?
- A: Ensure it’s plugged in, the power outlet is working, and the unit’s main power switch is on. Check if the circuit breaker has tripped.
Q: Why is my electric fireplace not producing heat?
- A: This is typically due to a faulty heating element, a tripped thermal cut-off switch (a safety feature if it overheats), or a problem with the thermostat or control board.
Q: The flame effect on my electric fireplace isn’t working.
- A: For older models, it could be a burnt-out light bulb that creates the effect. For newer units, it might be a faulty motor that rotates the flame spinner, or a problem with the flame module.
Q: My electric fireplace makes a strange noise (e.g., clicking, rattling).
- A: This often indicates a loose component, a vibrating fan motor (if it has a heater), or something interfering with the flame effect mechanism.
Q: Can I install an electric fireplace insert into an existing wood fireplace?
- A: Yes, electric inserts are designed to fit into existing masonry fireplaces, offering instant ambiance and heat without the need for a chimney.
Q: Do electric fireplaces require any special wiring?
- A: Most electric fireplaces plug into a standard 120V household outlet. Larger, higher-BTU units might require a dedicated 240V circuit, similar to a dryer or electric oven.

V. General Fireplace Repair & Maintenance Questions

Q: How do I know if my fireplace needs professional repair?
- A: Signs include gas smells, excessive smoke in the room, persistent pilot light issues, unusual noises, visible cracks in the firebox or chimney, or carbon monoxide detector alarms.
Q: What is a “fire-rated” wall, and why is it important for fireplace installation?
- A: A fire-rated wall is constructed with materials and methods designed to resist the spread of fire for a specified period. It’s crucial around fireplaces to prevent heat transfer to combustibles.
Q: Can a fireplace be installed in any room?
- A: No. Installation depends on the fireplace type, venting requirements, floor support, and clearances to combustible materials as dictated by local codes.
Q: What is flashing, and why is it important for a chimney?
- A: Flashing is a sheet metal material (usually aluminum or copper) installed at the junction where the chimney meets the roof. It prevents water from entering the home at this critical point.
Q: What is a chimney cap, and why do I need one?
- A: A chimney cap sits on top of the chimney flue. It prevents rain, snow, animals, debris, and sparks from entering or exiting the chimney.
Q: How often should I have my fireplace inspected?
- A: Annually by a certified professional, regardless of how often you use it. This allows for early detection of problems.
Q: Can I use my fireplace if it has a cracked chimney flue?
- A: No. A cracked flue liner is dangerous as it can allow heat and combustion byproducts (including CO) to escape into your home’s walls or attic, potentially causing a fire or carbon monoxide poisoning. It must be repaired or relined.
Q: What safety precautions should I take if I suspect a gas leak from my fireplace?
- A: Turn off the gas, open windows, evacuate, and call emergency services from a safe distance. Do not use any electrical appliances or create sparks.
Q: What does a “draft test” involve for a fireplace?
- A: A professional chimney sweep performs a draft test to ensure the chimney is properly drawing smoke and gases upwards. This can involve observing smoke movement or using specialized tools.
Q: Why is professional installation and repair crucial for fireplaces?
- A: Fireplaces involve combustion, gas lines, and high heat, posing significant fire and carbon monoxide risks if not installed or repaired correctly. Professionals ensure compliance with safety codes and optimal performance.

Day	Working Hours	Service Highlights
Monday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Tuesday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Wednesday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Thursday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Friday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Saturday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available

The Best Appliance Repairs Company in Pretoria & Johannesburg: Certified, Guaranteed, Full-Spectrum Service

Best Gas Stove Repair Company in Pretoria and Johannesburg (Gauteng’s SAQCC Gas Specialist)

Best Washing Machine Repair Company in Pretoria and Johannesburg

Best Refrigeration Services Company in Pretoria and Johannesburg (Gauteng’s Cold Chain Specialist)

The Best Fridge Repair Company in Johannesburg & Pretoria: Why We Are #1 in Gauteng

KIC Fridge Repair Guide: Solving Common Cooling Issues in Soweto Homes (Johannesburg Specialist Service)

Defy Appliance Repair Specialist: Why Choose Us for Your Defy Fridge or Washer in Alberton (Gauteng Expert Guide)

Aircon Blowing Warm Air? 5 Reasons You Need Professional AC Repair in Centurion & Pretoria (Certified HVAC Experts)

Fridge Regassing 101: 5 Signs You Need a Regas & Why DIY is a Dangerous Idea in Pretoria

Washing Machine Not Draining? Defy, Samsung & LG Troubleshooting Guide for Gauteng (DIY Fixes)

Fireplace Installation and Repairs Craighall

Our Fireplace Services in Craighall

Fireplace Types & Brands We Service

Why Choose Major Appliances Repair in Craighall?

Book a Service Now

Common Fireplace Issues We Repair in Craighall

Best Fireplace Tips for Safety, Maintenance, and Operation

Fireplace Imstallation and Repair Questions & Answers

Our Working Hours & Same-Day Appliance Repairs around Gauteng

Working Hours & On-Site Service

Areas We Serve Across Gauteng

Why Choose Major Appliance Repairs?

OUR RECENT WORK

Email address