Stove Repairs Edenvale–Gas and Electric Stove Repairs

Common Stove Issues We Repair in Edenvale

A malfunctioning stove can put a significant damper on your cooking plans. Whether it’s a minor hiccup or a major breakdown, our certified technicians are skilled at diagnosing and repairing a wide range of stove problems. Here are 30 common issues we frequently encounter, along with their typical causes and effective solutions:

Electric Stove & Oven Issues:

Electric Burner Not Heating:
- Cause: Most commonly, a faulty heating element (coil or radiant), a defective infinite switch (controls heat level), or a loose wire connection.
- Solution: Test and replace the faulty heating element or infinite switch. Tighten loose wiring.
Electric Burner Only Heats on High Setting:
- Cause: A defective infinite switch, which is responsible for regulating the power supply to the element across different heat settings.
- Solution: Replace the infinite switch.
Oven Not Heating At All:
- Cause: A burnt-out bake or broil element, a faulty temperature sensor, a defective oven control board, or a tripped circuit breaker.
- Solution: Test and replace the heating element or temperature sensor. Check/reset breaker. If it’s the control board, it requires professional replacement.
Oven Temperature Inaccurate (Too Hot or Too Cold):
- Cause: A faulty oven temperature sensor (most common), a miscalibrated thermostat, or a malfunctioning oven control board.
- Solution: Test and replace the temperature sensor. Calibrate the thermostat if possible, or replace the control board.
Oven Light Not Working:
- Cause: A burnt-out light bulb, a faulty light switch (often near the door), or a problem with the light’s wiring.
- Solution: Replace the bulb. Test and replace the light switch if defective.
Self-Cleaning Cycle Not Working:
- Cause: A faulty door latch mechanism (the door must lock for safety), a defective oven control board, or a broken thermostat.
- Solution: Inspect and repair/replace the door latch. Test control board or thermostat.
Oven Door Won’t Close Properly:
- Cause: Worn or broken door hinges, a damaged door gasket/seal, or a misaligned door.
- Solution: Replace worn hinges or the door gasket. Realign the door.
Glass Cooktop Cracked:
- Cause: Heavy impact, extreme temperature changes, or manufacturing defects.
- Solution: Replacement of the glass cooktop surface. This is a common but crucial repair.
Oven Fan Running Constantly:
- Cause: A faulty thermostat, a stuck relay on the control board, or a problem with the fan motor’s wiring.
- Solution: Diagnose and repair/replace the thermostat or control board component.
Oven Display Not Working:
- Cause: A faulty control board, loose ribbon cable connection, or a power supply issue to the display.
- Solution: Professional diagnosis of the control board or connections.

Gas Stove & Oven Issues:

Gas Burner Not Igniting/Lighting:
- Cause: A clogged burner port (food debris), a wet or dirty igniter (electrode), a faulty spark module (no spark), a loose wire connection, or the gas supply valve is off.
- Solution: Clean burner ports, dry igniter. If no spark, diagnose/replace igniter or spark module. Check gas valve.
Gas Burner Ignites But Flame Is Weak/Uneven:
- Cause: Clogged burner ports, low gas pressure, or a faulty burner valve.
- Solution: Clean burner ports thoroughly. Check gas pressure. Replace burner valve if necessary.
Oven Not Heating (Gas Oven):
- Cause: A faulty igniter (most common, it needs to glow to light the gas), a defective oven safety valve, or issues with the oven’s gas supply.
- Solution: Test and replace the igniter. Check the safety valve or gas supply.
Persistent Clicking Sound from Gas Stove (Continuous Sparking):
- Cause: Often due to a wet or dirty igniter, a faulty spark module that’s constantly sending current, or a loose wiring connection.
- Solution: Dry/clean igniter. If it persists, replace the spark module.
Smell of Gas (Without a Lit Burner):
- Cause: A serious issue indicating a gas leak from a loose connection, a cracked gas line, or a faulty valve.
- Solution: IMMEDIATE ACTION REQUIRED: Turn off gas supply, open windows, evacuate, and call a professional gas technician/emergency service immediately. Do not use any electrical appliances.
Oven Burner Flames Are Yellow or Orange (Should Be Blue):
- Cause: Incomplete combustion, often due to clogged burner ports, incorrect air-to-gas mixture (flame adjustment), or a problem with the gas supply.
- Solution: Clean burner ports. Adjust air shutter (professional only).
Gas Oven Door Won’t Lock for Self-Clean:
- Cause: A faulty door lock motor/switch, or issues with the oven’s control board.
- Solution: Inspect and repair/replace the door lock assembly or control board.
Gas Burner Won’t Turn Off:
- Cause: A faulty burner valve that is stuck open or not fully closing.
- Solution: Replace the burner valve.
Pilot Light Goes Out Frequently (Older Gas Stoves):
- Cause: A faulty thermocouple (safety device), a dirty pilot opening, or a draft.
- Solution: Clean pilot, replace thermocouple.
Food Burns Too Quickly in Gas Oven:
- Cause: Oven temperature sensor is faulty, leading to overheating, or issues with the oven’s gas pressure regulator.
- Solution: Test/replace temperature sensor. Check gas pressure regulator (professional).

General Stove & Oven Issues (Electric & Gas):

Broken Oven Door Glass:
- Cause: Impact, thermal shock, or manufacturing defect.
- Solution: Replacement of the oven door glass panel (inner or outer).
Stove/Oven Display Error Codes:
- Cause: Indicates a specific malfunction detected by the appliance’s internal diagnostics. The code points to a sensor failure, control board issue, or other component fault.
- Solution: Consult owner’s manual for code meaning. Often requires professional diagnosis and part replacement.
Control Knobs Broken or Loose:
- Cause: Wear and tear, excessive force, or internal shaft damage.
- Solution: Replacement of control knobs or internal valve/switch shafts.
Stove Light Not Working (Cooktop Area):
- Cause: Burnt-out bulb, faulty light switch, or wiring problem.
- Solution: Replace bulb, test/replace switch.
Main Power Tripping (Stove/Oven):
- Cause: A short circuit within the appliance (e.g., faulty heating element, wiring, control board), or an electrical overload.
- Solution: Professional diagnosis to find the short.
Oven Door Not Sealing Properly:
- Cause: Worn, torn, or damaged door gasket/seal, or misaligned hinges.
- Solution: Replace the door gasket. Repair/replace hinges.
Oven Too Smoky or Smelly:
- Cause: Food spills inside the oven (common), a dirty broiler pan, or in rare cases, a faulty heating element producing excessive smoke.
- Solution: Thoroughly clean oven interior. Clean broiler pan. If persists, inspect heating elements.
Food Cooking Unevenly in Oven:
- Cause: Faulty temperature sensor, partially burnt-out heating element, poor air circulation, or misaligned racks.
- Solution: Test/replace temperature sensor or element. Check for obstructions.
Timer/Clock Not Working:
- Cause: A faulty clock module or control board, or a power interruption affecting its memory.
- Solution: Reset appliance. If not, professional replacement of the clock module/control board.
Stove Making Humming or Vibrating Noise:
- Cause: A loose component, a vibrating fan motor (especially in convection ovens), or sometimes related to gas pressure.
- Solution: Professional inspection to identify and secure/replace the source of the vibration.

For any of these stove issues, especially those involving gas or electrical components, it’s always safest and most effective to contact a qualified appliance repair technician. Attempting complex repairs yourself can be dangerous and may void warranties.

Taking good care of your stove, whether it’s electric or gas, is crucial for its longevity, efficient performance, and most importantly, your safety. Regular maintenance and adherence to safety guidelines can prevent accidents and costly repairs.

Here are major tips for stove care and safety:

Stove Care Tips:

Read Your Owner’s Manual: This is paramount. Every stove has unique features, cleaning instructions, and maintenance requirements. Familiarize yourself with your specific model.
Regular Cleaning is Key:
- Cooktop: Wipe down after every use to prevent spills from baking on. For electric coil stoves, clean drip pans. For gas stoves, clean burner grates and caps.
- Oven Interior: Address spills immediately to prevent them from becoming stubborn, smoke-producing residue. Use oven cleaner as per instructions, or a natural paste of baking soda and water for lighter cleaning.
- Glass Cooktops: Use non-abrasive cleaners and soft cloths specifically designed for glass cooktops to prevent scratching. Scrape off burned-on food with a ceramic scraper while the surface is cool.
- Knobs and Handles: Clean regularly, as they can collect grease and grime.
Inspect and Clean Burner Components (Gas Stoves):
- Burner Ports: Ensure the small holes around the burner cap are clear of food debris. Use a paperclip or a thin wire to gently poke through them if clogged. Clogged ports lead to uneven flames.
- Igniters: Keep igniters clean and dry. A dirty or wet igniter won’t spark properly.
Check Oven Door Seals (Gaskets):
- Inspect the rubber or silicone gasket around the oven door regularly for tears, cracks, or wear. A damaged seal allows heat to escape, increasing cooking time and energy consumption. Replace if damaged.
Clean Oven Vents:
- Ensure the oven’s exhaust vents (usually located above or below the oven door, or behind the cooktop) are clear of obstructions. Blocked vents can affect temperature regulation.
Avoid Aluminum Foil as Liners:
- Unless specifically approved by your manufacturer, do not line your oven with aluminum foil. It can trap heat, damage the oven’s finish, interfere with proper baking, and even cause electrical shorts.
Use Proper Cookware:
- For Electric Coils/Radiant: Use flat-bottomed pots and pans that match the burner size for even heating and efficiency.
- For Induction Cooktops: Only use induction-compatible cookware (magnetic bottom).
- For Gas Stoves: Cookware type is less critical, but ensure pots are stable on grates.
Periodically Calibrate Oven Temperature:
- If you suspect your oven temperature is off (e.g., food consistently bakes too fast or too slow), you can use an oven thermometer to check its accuracy. Most ovens can be calibrated by a technician or, in some models, manually adjusted.
Professional Servicing:
- Consider an annual or bi-annual professional inspection, especially for gas stoves. Technicians can check for gas leaks, calibrate thermostats, inspect electrical connections, and ensure all components are functioning safely and efficiently.

Stove Safety Tips:

Never Leave Cooking Unattended: This is the golden rule. Many kitchen fires start because cooking was left unattended.
Keep Flammables Away:
- Ensure curtains, dish towels, oven mitts, paper towels, and other flammable materials are well away from stove burners and the oven door.
Wear Appropriate Clothing:
- Avoid loose-fitting clothing or dangling sleeves that could catch fire or get caught on stove elements/knobs.
Know How to Extinguish Grease Fires:
- NEVER use water on a grease fire.
- Turn off the heat.
- Smother the flames with a metal lid or baking soda.
- Keep a fire extinguisher (Class K for kitchen fires, or ABC for general use) readily accessible and know how to use it.
Install Smoke and Carbon Monoxide Detectors:
- Ensure you have working smoke detectors in your home, especially near the kitchen.
- If you have a gas stove, install a carbon monoxide (CO) detector nearby. CO is an invisible, odorless, deadly gas.
Use Proper Ventilation:
- Always use your range hood or extractor fan when cooking to remove smoke, steam, and grease, which also helps improve air quality and prevent grease buildup.
Child and Pet Safety:
- Use back burners whenever possible.
- Turn pot handles inwards, away from the edge.
- Consider stove knob covers or oven door locks if you have small children.
- Keep pets off counters and away from the stove.
Don’t Use Oven for Heating Your Home:
- Using your oven to heat your home is inefficient, dangerous (especially for gas ovens due to CO risk), and can damage the appliance.
Unplug Electric Stoves for Major Cleaning/Repair:
- Before performing any significant cleaning or attempting repairs on an electric stove, always unplug it or turn off the circuit breaker.
Address Gas Smells Immediately:
- If you smell gas, turn off all stove burners and the main gas supply valve immediately.
- Open windows and doors to ventilate the area.
- Do NOT turn on or off any electrical switches, lights, or appliances.
- Evacuate everyone from the building and call your gas provider or emergency services from a safe distance.
Keep a First-Aid Kit Handy:
- Burns and minor cuts can happen. Have a well-stocked first-aid kit readily available in your kitchen.

By diligently following these care and safety tips, you can significantly reduce the risk of accidents and ensure your stove serves you reliably for years to come.

Stove Repair Questions & Answers

At Major Appliances Repair, we understand that a broken stove can quickly throw your kitchen into disarray. With over 16 years of experience, our certified technicians are experts at diagnosing and fixing virtually any stove problem. Here are the most frequently asked questions about stove repairs, along with comprehensive answers to help you understand your appliance better.

Electric Cooktop/Hob Issues

Q: My electric burner won’t heat up at all. What’s the problem?
- A: This is a very common issue. The most likely causes are a faulty heating element itself, a defective infinite switch (the knob that controls the heat), or a loose wire connection to the element or switch. We test each component to pinpoint the exact failure.
Q: Why does my electric burner only heat on the high setting?
- A: This almost always points to a malfunctioning infinite switch. This switch is designed to regulate the power flow to the element across different heat settings. If it’s only sending full power, it needs to be replaced.
Q: My ceramic glass cooktop has a crack. Can it be repaired or does it need replacement?
- A: Unfortunately, a cracked ceramic glass cooktop surface cannot be repaired; it requires a complete replacement. Continuing to use a cracked surface is dangerous due to potential electrical shock or further shattering.
Q: Why are my electric coil burners sparking or arcing?
- A: Sparking or arcing indicates a short circuit. This could be due to a damaged heating element (e.g., exposed wire), a loose connection in the terminal block, or moisture around the element. Discontinue use immediately and call for professional inspection.
Q: My electric induction cooktop isn’t working with my pots. What’s wrong?
- A: Induction cooktops require specific magnetic cookware. If your pots aren’t induction-compatible, they won’t heat. If you’re using compatible cookware, the issue could be a faulty induction coil, a defective control board, or a sensor problem.
Q: Why is one of my electric cooktop indicator lights not working?
- A: It’s usually a burnt-out bulb. If the bulb is fine, it could be a wiring issue, or a fault within the switch or control board.

Gas Cooktop/Hob Issues

Q: My gas burner won’t ignite or light. What should I check?
- A: First, ensure the gas supply valve to the stove is open. Then, check for food debris clogging the burner ports or a wet igniter (electrode). If clean and dry, the problem might be a faulty igniter, a weak spark module, or loose wiring.
Q: Why does my gas burner ignite but the flame is weak or uneven?
- A: A weak or uneven flame is typically caused by clogged burner ports (food debris). It could also indicate low gas pressure or a faulty burner valve that isn’t allowing sufficient gas flow.
Q: My gas stove is making a persistent clicking sound even when off. Why?
- A: This continuous clicking means the igniter is constantly sparking. Common causes are a wet igniter (from recent cleaning or spill), a dirty igniter, a faulty spark module that’s constantly sending current, or a loose wiring connection.
Q: Why does my gas stove burner keep turning off after lighting?
- A: This often points to a problem with the flame sensor (thermocouple in older models). If the sensor doesn’t detect a flame quickly enough, it shuts off the gas supply as a safety measure. It could also be poor gas flow or a dirty burner.
Q: I smell gas near my stove, but no burner is on. What should I do?
- A: This is a serious safety hazard. Immediately turn off the gas supply to the stove, open windows and doors, evacuate everyone from the building, and call your gas provider or emergency services from a safe distance. Do NOT turn on or off any electrical switches or appliances.
Q: Why are my gas oven burner flames yellow or orange instead of blue?
- A: A yellow or orange flame indicates incomplete combustion, which can produce carbon monoxide. This is usually caused by clogged burner ports, incorrect air-to-gas mixture (requiring a professional adjustment of the air shutter), or sometimes a problem with the gas supply pressure.
Q: My gas burner knobs are stuck or hard to turn. Can they be fixed?
- A: They might be coated with grease buildup underneath the knob, or the valve stem itself could be worn or damaged. Cleaning can help if it’s grease; otherwise, the burner valve may need replacement.

Oven Heating & Temperature Issues

Q: My electric oven is not heating at all. What are the common causes?
- A: The most frequent culprits are a burnt-out bake or broil element, a faulty oven temperature sensor, a defective oven control board, or a tripped circuit breaker for the oven.
Q: My gas oven is not heating. What could be the issue?
- A: For gas ovens, the most common reason is a faulty igniter. The igniter must draw enough current to glow and also open the gas safety valve. If it’s weak or burnt out, the gas won’t flow. Other causes include a defective oven safety valve or issues with the gas supply.
Q: Why is my oven temperature inaccurate (either too hot or too cold)?
- A: This is usually due to a faulty oven temperature sensor (a common part to fail), a miscalibrated thermostat, or a malfunctioning oven control board sending incorrect signals.
Q: Food is burning on the bottom of my oven, but not cooking on top. Why?
- A: This suggests the bake element is working fine, but the broil element (top) or convection fan (if applicable) isn’t. It could also be due to an improperly sized oven, or food placed too low.
Q: My oven is heating too slowly. What causes this?
- A: A weak or partially failing heating element (electric), a weak igniter (gas), or a faulty temperature sensor that’s delaying the heating process can cause slow preheating.
Q: Why is my oven preheating, but then the temperature drops or doesn’t hold?
- A: This often indicates a problem with the oven temperature sensor or the control board. The sensor might be sending inaccurate readings, causing the heating elements to cycle off too soon or not turn on when needed.

Oven Door & Interior Issues

Q: My oven door won’t close properly. How can I fix this?
- A: This is commonly caused by worn or broken oven door hinges, a damaged or torn door gasket (seal), or the door being out of alignment. Replacing the hinges or gasket usually solves the problem.
Q: The glass on my oven door is cracked. Can it be repaired?
- A: No, like a cooktop, cracked oven door glass cannot be repaired and must be replaced. It’s a safety hazard and will lead to heat loss.
Q: Why is my oven light not working?
- A: The most common reason is a burnt-out oven light bulb. If replacing the bulb doesn’t work, it could be a faulty light switch (often located near the door hinge) or a wiring issue.
Q: My oven’s self-cleaning cycle isn’t working. What’s the problem?
- A: The self-cleaning cycle relies on the door locking securely. If the door latch mechanism is faulty, the cycle won’t start. A defective oven control board or temperature sensor can also prevent it.
Q: Why is my oven smoking or smelling when I use it?
- A: Often, this is due to food spills inside the oven or on the elements that are burning off. Excessive smoke or a burning smell (especially electrical) could also indicate a faulty heating element or wiring. Thorough cleaning is usually the first step.
Q: Why is my oven fan running constantly, even after it cools down?
- A: This is usually a sign of a faulty cooling fan thermostat that’s stuck on, or a stuck relay on the main control board that’s keeping the fan powered.

General Stove & Oven Issues

Q: My stove’s main power keeps tripping the circuit breaker. What’s causing this?
- A: A tripping breaker indicates a short circuit or an electrical overload within the appliance. This could be a faulty heating element, damaged wiring, a defective control board, or an issue with the power supply to the stove.
Q: The control knobs on my stove are loose or broken. Can I replace them myself?
- A: Loose knobs can often be tightened. If a knob is broken, replacement is usually straightforward; many are pull-off/push-on. However, if the shaft they attach to is broken, it requires professional repair of the internal valve or switch.
Q: My oven display screen is not working or showing error codes. What do the codes mean?
- A: Error codes indicate specific malfunctions detected by the appliance’s internal diagnostics (e.g., sensor failure, communication error, component fault). You’ll need to consult your owner’s manual to interpret the code. Often, it points to a control board or sensor issue.
Q: Why is my stove making a buzzing or humming noise?
- A: A buzzing can come from the clock/timer motor, a relay on the control board, or even a faulty gas valve. Humming might be a cooling fan or slight vibration. Identifying the exact source usually requires professional inspection.
My stove’s timer or clock is not working. How can I fix it?
- A: First, try resetting the appliance by unplugging it for a few minutes or flipping the breaker. If that doesn’t work, the clock module or control board may be faulty and need replacement.

Additional Common Questions

Q: Why is my convection oven fan not spinning?
- A: A faulty convection fan motor or a broken fan blade.
Q: What is a “hot surface” indicator light and why is it staying on?
- A: It indicates a burner is hot. If it stays on when the burner is cool, it’s a faulty sensor or switch.
Q: Can I replace a stove heating element myself?
- A: For coil elements, yes, it’s relatively simple. For radiant elements under glass, it’s more complex and often requires professional help. Always disconnect power first.
Q: Why does my stove take so long to preheat?
- A: Weak heating elements (electric), weak igniter (gas), or a faulty temperature sensor.
Q: My stove’s interior light (for the oven) isn’t turning on.
- A: Check the bulb first, then the light switch (often near the door).
Q: Why is food cooking unevenly in my oven?
- A: Faulty temperature sensor, partially failing heating element, or poor air circulation (check for obstructions).
Q: What are the risks of using a gas stove with a yellow flame?
- A: Incomplete combustion, which can produce carbon monoxide. This is a safety hazard and needs immediate attention.
Q: How do I clean burned-on food from my glass cooktop?
- A: Use a glass cooktop cleaner and a non-abrasive scrubber or a specific ceramic scraper on a cool surface.
Q: My stove timer doesn’t alert me when finished.
- A: A faulty speaker or control board issue.
Q: Why is my electric stove element sparking when wet?
- A: Water can cause a short circuit. Ensure the element is dry before using. If it persists when dry, the element may be faulty.
Q: Can power surges damage my stove’s electronics?
- A: Yes, power surges can damage sensitive control boards and electronic components. Consider a surge protector.
Q: My dual fuel range’s gas cooktop works, but the electric oven doesn’t.
- A: Treat this as a separate electric oven issue. Check the oven elements, sensor, and control board.
Q: How do I clean clogged gas burner ports?
- A: Use a paperclip or thin wire to gently poke through the holes. Avoid toothpicks as they can break inside.
Q: Why does my oven door get extremely hot on the outside?
- A: A faulty or worn oven door gasket/seal, or inadequate insulation within the door.
Q: My stove has a “lock” feature, but it won’t unlock.
- A: Could be a temporary software glitch (try resetting power), or a fault in the locking mechanism or control board.
Q: The digital clock on my stove is flashing/incorrect.
- A: Typically caused by a power outage. Reset the clock manually. If it persists, it might be a control board issue.
Q: Why does my gas stove have a strong gas smell when first turned on?
- A: A slight smell is normal immediately after igniting. A strong, persistent smell indicates a leak and requires immediate professional attention.
Q: Can a dirty stove affect cooking performance?
- A: Yes. Burned-on food can cause uneven heating, smoke, and affect temperature sensing in the oven. Dirty burner ports cause uneven flames.
Q: What is a “thermal fuse” in an oven and why does it trip?
- A: A thermal fuse is a safety device that trips if the oven overheats. It’s usually a non-resettable fuse and indicates a problem with the thermostat or a cooling issue.
Q: When should I consider replacing my stove instead of repairing it?
- A: Consider replacement if: the repair cost is more than 50% of a new stove’s price, the appliance is very old (10+ years), or it experiences frequent, recurring major problems.

For any of these complex stove issues, particularly those involving gas or intricate electrical components, it’s always safest and most effective to contact a qualified appliance repair technician. Attempting repairs yourself can be dangerous and may void warranties.

Day	Working Hours	Service Highlights
Monday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Tuesday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Wednesday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Thursday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Friday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available
Saturday	7:00 AM – 6:30 PM	Same-day on-site repairs & emergency service available

The Best Appliance Repairs Company in Pretoria & Johannesburg: Certified, Guaranteed, Full-Spectrum Service

Best Gas Stove Repair Company in Pretoria and Johannesburg (Gauteng’s SAQCC Gas Specialist)

Best Washing Machine Repair Company in Pretoria and Johannesburg

Best Refrigeration Services Company in Pretoria and Johannesburg (Gauteng’s Cold Chain Specialist)

The Best Fridge Repair Company in Johannesburg & Pretoria: Why We Are #1 in Gauteng

KIC Fridge Repair Guide: Solving Common Cooling Issues in Soweto Homes (Johannesburg Specialist Service)

Defy Appliance Repair Specialist: Why Choose Us for Your Defy Fridge or Washer in Alberton (Gauteng Expert Guide)

Aircon Blowing Warm Air? 5 Reasons You Need Professional AC Repair in Centurion & Pretoria (Certified HVAC Experts)

Fridge Regassing 101: 5 Signs You Need a Regas & Why DIY is a Dangerous Idea in Pretoria

Washing Machine Not Draining? Defy, Samsung & LG Troubleshooting Guide for Gauteng (DIY Fixes)

Stove Repairs Edenvale

Book a Service Now

Common Stove Issues We Repair in Edenvale

Stove Care Tips:

Stove Safety Tips:

Stove Repair Questions & Answers

Our Working Hours & Same-Day Appliance Repairs around Gauteng

Working Hours & On-Site Service

Areas We Serve Across Gauteng

Why Choose Major Appliance Repairs?

OUR RECENT WORK

Email address